|John Bowers received the IEEE Nishizawa Medal for contributions to photonic integrated circuit technologies.||November 28, 2023|
|2023 IPC Tutorial by Prof. John Bowers||November 14, 2023||
Prof. John Bowers' tutorial on heterogenous integration for data center and sensing applications at 2023 IEEE Photonics Society Conference! Please check out the slides below.
|IEE 15 Year Anniversary||November 3, 2023||
IEE's 15 Year Anniversary! Celebrating Innovations!
|The UC Santa Barbara Nanofab: An Innovation Center||October 22, 2023||
The UC Santa Barbara Nanofabrication Facility (Nanofab) is a state-of-the-art cleanroom with more than $60 million in equipment. The Nanofab combines world-class cleanrooms with its expert staff to enable students, faculty, and members from industry design and build impactful nano- and micro-scale technologies. Due to the facility's track record of enabling cutting-edge technology, UCSB and the Nanofab will play a pivotal role in one of the eight national innovation hubs that were…
|We are cited in Nobel Prize Chemistry on Quantum Dot this year!||October 8, 2023||
Our review paper was cited in the Nobel Prize in Chemistry 2023 when they briefly discussed epitaxial dots used in semiconductor lasers as light emitters for optical communication in Reference 68!
|Going Vertical to Advance PICs||September 15, 2023||
ECE Prof. John Bowers and his lab researchers have spent several decades advancing photonic integrated circuits (PICs) – and now, with Caltech and Anello photonic colleagues, they have achieved a significant breakthrough. Bowers and the researchers' work appears in the August 3 issue of the journal NATURE, in an article titled “3D integration enables ultralow-noise isolator-free lasers in silicon photonics.”
|3D PIC Integration without an Isolator published in Nature||August 5, 2023||
Photonic integrated circuits are widely used in applications such as telecommunications and data-centre interconnects. However, in optical systems such as microwave synthesizers, optical gyroscopes and atomic clocks, photonic integrated circuits are still considered inferior solutions despite their advantages in size, weight, power consumption and cost. Such high-precision and highly coherent applications favour ultralow-noise laser sources to be integrated with other photonic components in…
|Broadband quantum dot frequency modulated comb laser published in Light:Science&Application||July 25, 2023||
Frequency-modulated (FM) laser combs, which offer a quasi-continuous-wave output and a flat-topped optical spectrum, are emerging as a promising solution for wavelength-division multiplexing applications, precision metrology, and ultrafast optical ranging. The generation of FM combs relies on spatial hole burning, group velocity dispersion, Kerr nonlinearity, and four-wave mixing (FWM). While FM combs have been widely observed in quantum cascade Fabry-Perot (FP) lasers, the requirement for a…
|Design rules for the integration template for monolithic on-chip light sources published in Advanced Functional Materials||July 8, 2023||
Integrating quantum dot (QD) gain elements onto Si photonic platforms via direct epitaxial growth is the ultimate solution for realizing on-chip light sources. Tremendous improvements in device performance and reliability have been demonstrated in devices grown on planar Si substrates in the last few years. Recently, electrically pumped QD lasers deposited in narrow oxide pockets in a butt-coupled configuration and on-chip coupling have been realized on patterned Si photonic wafers. However…
|Stable Low Noise, AlGaAsOI Dark Pulse Comb Source||June 12, 2023|
|Heterogeneous 780 nm narrowlinewidth tunable laser||June 9, 2023|
|Congratulations to Chen on winning the Tingye Li Innovation Prize||June 9, 2023|
|QD Laser Integrated on Silicon Carbide||May 15, 2023|
|E-band laser integrated with S-C-L band lasers on Si||April 24, 2023|
|Quantum limited coherence of dark pulses||March 31, 2023|
|Adjustable SiN zero-dispersion microcombs||February 15, 2023|
|Review of on-chip laser technology published in eLight||January 4, 2023|
|An integrated DWDM and mode multiplexed transmission system designed at Stanford||December 22, 2022|
|1 Hz Integrated Linewidth Laser on Si||October 28, 2022|
|First growth of quantum dot lasers in channels on 300 mm SOI substrates published in Light Science and Applications||October 14, 2022|
|New paper in Nature on High temperature (185C) Shorter Wavelength Lasers (< 1um) on SiN/SiO2/Si||September 28, 2022|
|Pockels Laser on Si||September 12, 2022|
|New paper in Nature Electronics on 4K Magneto-optic modulators||September 8, 2022|
|Review of Comb Technologies Published in Nature Photonics||September 8, 2022|
|A comprehensive summary of recent heterogeneous photonic integration on silicon||August 22, 2022|
|New Nature paper on AlGaAsOI high-Q resonators used in 2 Tbps systems||August 22, 2022|
|New summary of QD technology in IEEE Nanotechnology Magazine||August 22, 2022|
|Our paper on reflection sensitivity of Quantum Dot lasers was chosen as "Best Paper of 2019 in Photonics Technology Letters||September 21, 2021|
|Congrats to Bob Herrick on publishing a new book!||September 21, 2021||
Congratulations to Bob Herrick on publishing a new book on Reliability of Semiconductor Lasers. We wrote a chapter on QD laser on silicon reliability in the book.
|On the front page of Google news! The first commercially scalable integrated laser and microcomb on a single chip.||July 9, 2021||
See the article here
|Science paper on the key DODOS seedling (integrating laser and > combs)||July 9, 2021||
Available online here.
|This overview of the Future of Silicon Photonics and Electronics was just published in APL Perspectives||June 4, 2021|
|Congratulations to Yating on winning the Tingye Li Innovation Prize||May 19, 2021||
We are so proud of you!
|A New Review Paper on QD Lasers and SOAs Published in IEEE Nanotechnology Magazine||May 5, 2021|
|UCSB Technology Management's New Venture Fair!||April 27, 2021||
After 7 months of researching, prototyping, and validating their businesses, 13 Teams will participate in UCSB Technology Management's New Venture Fair -- the first of two culminating events as part of our Annual New Venture Competition. The event is FREE and open to the public. Register today at www.newventure.live. Spread the word!
|Congratulations to Warren Jin and collaborators at UCSB and Caltech for publishing "Hertz-linewidth semiconductor lasers using CMOS-ready ultra-high-Q microresonators" in Nature Photonics. Coupling a high Q resonator to a DFB laser using self injection l||February 18, 2021|
|Congrats to Travis for a featured article in APL Photonics on self injection locked octave spanning combs!||February 18, 2021|
|AlGaAsOI Resonators generate 1000x higher entangled photon generation rate||February 16, 2021|
|OSA Webinar||February 11, 2021|
|Two new frequency combs could boost telecoms and molecular fingerprinting||July 8, 2020|
|An new way to simply generate low noise solitons with injection locked lasers and resonators was just published in Nature||June 23, 2020|
|An important paper on limits to linewidths in widely tunable lasers has just been published||June 23, 2020|
|Plenary Talk at CLEO||May 14, 2020||
|Hot Topic Talk at CLEO on New Nonlinear Platform||May 12, 2020||
|Integration of semiconductor lasers with low loss Si3N4 waveguides results in very low linewidths (<1 kHz) and great temperature stability (10 pm/C).||March 2, 2020|
|Tutorial on narrow linewidth tunable semiconductor lasers using Si/III-V heterogeneous integration||February 1, 2020|
|Congrats to Yating and group for demonstration the first tunable single wavelength quantum dot (QD) laser directly grown on Si.||October 24, 2019||
We demonstrate the first tunable single wavelength quantum dot (QD) laser directly grown on Si. A simple, integrable architecture is implemented without involving re-growth steps or sub-wavelength grating lithography. 16 nm tuning range was achieved with over 45 dB SMSR and output powers exceeding 2.7 mW per tuning wavelength. The choice of QD gain material promotes high lasing efficiency in the presence of defects introduced by lattice-…
|Congratulations to Dr. Archie Holmes on being selected as Executive Vice Chancellor for the University of Texas System!||September 30, 2019||
|Beautiful Santa Barbara||September 29, 2019||
The very best of Santa Barbara, filmed by Christopher Helkey, watch here.
|NSF names UC Santa Barbara home to its first Quantum Foundry, a center for developing materials and devices for quantum information-based technologies||September 27, 2019||
|Pushing the Data Capacity Limit with Lasers on Silicon||September 27, 2019||
Pushing the Data Capacity Limit with Lasers on Silicon
|Congrats to Yating and Justin on the publication of a chapter on Quantum Dot Microcavities in the new Elsevier book, "Future of Silicon Photonics", volume 101 of Semimetals||September 27, 2019||
Congrats to Yating and Justin on the publication of a chapter on Quantum Dot Microcavities in the new Elsevier book, "Future of Silicon Photonics", volume 101 of Semimetals:
|UC ranked #1 in the world in patents in 2018!||September 26, 2019||
UC ranked #1 in the world in patents in 2018!
|Congratulations Mike, Yating, Songtao and everyone for 2 of the top 10 articles which are from our group.||September 20, 2019||
two papers from our group are selected as the top 10 cited articles on Integrated Optics published in 2018
|A history of the laser: 1960 to 2019||June 7, 2019||
In 2020, the laser will celebrate its 60th anniversary. Here Photonics Media presents a timeline of some of the more notable scientific accomplishments related to light amplification by stimulated emission of radiation (laser). An interactive version of the laser timeline is also available, as well as a primer on laser basics detailing how lasers work.
|New linearized ring modulator||June 6, 2019||
Abstract—Silicon photonics offer a low-cost platform for large- scale RF system integration. Spur-free dynamic range (SFDR) for analog and RF photonic components is limited by electri- cal and optical characteristics of the p- and n- junction used to produce plasma dispersion. We propose a silicon ring modula- tor and demonstrate design conditions that balance the phase change between the DC Kerr and plasma dispersion effects to produce a broadband, linear electro-optical conversion. A…
|UC ranked #1 in the world in patents in 2018||June 4, 2019||
"The National Academy of Inventors and the Intellectual Property Owners Association have announced their seventh annual report on trends within academic patenting. The Top 100 Worldwide Universities Granted U.S. Utility Patents in 2018 has been announced by the National Academy of Inventors (NAI) and the Intellectual Property Owners Association (IPO). The report is created using data from the U.S. Patent and Trademark Office (USPTO), and it highlights the vital role patents play in…
|A paper on 500 Hz linewidth DBR lasers on silicon just published in Optica.||May 29, 2019||
We demonstrate a fully integrated extended distributed Bragg reflector (DBR) laser with ∼1 kHz linewidth and over 37 mW output power, as well as a ring-assisted DBR laser with less than 500 Hz linewidth. The extended DBR lasers are fabricated by heterogeneously integrating III-V material on Si as a gain section plus a 15 mm long, low-kappa Bragg grating reflector in an ultralow-loss silicon waveguide. The low waveguide loss (0.16 dB/cm) and long Bragg grating with narrow bandwidth (2.9 GHz)…
|Looking for 2 postdocs experienced in optoelectronics and photonic integrated circuits!||May 16, 2019||
Please email your CV and a cover letter to Professor John Bowers at firstname.lastname@example.org and cc email@example.com.
|Honorable mention for the Corning Student Paper Competition||March 20, 2019||
Sub-kHz linewidth Extended-DBR lasers heterogeneously integrated on silicon by D. Huang, M. A. Tran, J. Guo, J. Peters, T. Komljenovic, A. Malik, P. A. Morton, J. E. Bowers.
We demonstrate single-mode E-DBR lasers with 1kHz linewidth and >37mW output power, and ring-assisted E-DBR lasers with 500Hz linewidth, by heterogeneously integrating III-V gain material with a 15mm long ultra-low loss silicon waveguide-based Bragg reflector.
|New Quantum Cascade Laser paper selected as the cover of Photonics||March 15, 2019||
Abstract: Multi-spectral midwave-infrared (mid-IR) lasers are demonstrated by directly bonding quantum cascade epitaxial gain layers to silicon-on-insulator (SOI) waveguides with arrayed waveguide grating (AWG) multiplexers. Arrays of distributed feedback (DFB) and distributed Bragg-reflection (DBR) quantum cascade lasers (QCLs) emitting at 4.7 μm wavelength are coupled to AWGs on the same chip. Low-loss spectral beam combining allows for brightness scaling by coupling the light generated by…
|New Paper on GaAs SHG Chosen as Editor's Pick at APL Photonics||March 15, 2019||
In this contribution, we demonstrate the first integrated gallium arsenide (GaAs) ring resonator for second harmonic generation (SHG) on a GaAs-on-insulator platform. Such resonators exhibit high nonlinear optical coefficients, a strong optical confinement, and intrinsic quality factors exceeding 2.6 Å~ 105, which makes them very attractive for nonlinear optical applications. The fabricated resonators exhibit a great potential for frequency conversion: when 61 μW of pump power at 2 μm…
|High Performance Photonic Integrated Circuits on Silicon||March 12, 2019||
A new invited review paper on heterogeneous integration of III-V semiconductor photonics combined with silicon foundry technology has just been published in IEEE Journal of Selected Topics in Quantum Electronics.
"Heterogeneous integration of III-V semiconductor photonics combined with silicon foundry technology enables low-cost, high-performance photonic integrated circuits. Highly reliable lasers using epitaxial deposition of quantum dot lasers, with <2 mA threshold and lifetime…
|The AIM Photonics Silicon foundry was used to build this 8x4multi-wavelength selective ring resonator based crossbar switch matrix||February 12, 2019||
Here we demonstrate an 8x4 multi-wavelength selective ring resonator based crossbar switch matrix implemented in a 220-nm silicon photonics foundry for interconnecting electronic packet switches in scalable data centers. This switch design can dynamically assign up to two wavelength channels for any port-port connection, providing almost full connectivity with significant reduction in latency, cost and complexity. The switch unit cell insertion loss was measured at 0.8 dB, with an out-of-…
|A mode locked quantum dot laser was used to transmit 4.1 Tbps of data on 64 lines spaced at 20 GHz.||January 25, 2019||
Low-cost, small-footprint, highly efficient, and mass-producible on-chip wavelength-division-multiplexing (WDM) light sources are key components in future silicon electronic and photonic integrated circuits (EPICs), which can fulfill the rapidly increasing bandwidth and lower energy per bit requirements. We present here, for the first time to our knowledge, a low-noise high-channel-count 20 GHz passively mode-locked quantum dot laser grown on a complementary metal-oxide-semiconductor…
|Arrays of DFB QCLs emitting at 4.7 μmwavelength are coupled to AWGs on the same chip in this new paper in Photonics||January 24, 2019||
Multi-spectral midwave-infrared (mid-IR) lasers are demonstrated by directly bonding quantum cascade epitaxial gain layers to silicon-on-insulator (SOI) waveguides with arrayed waveguide grating (AWG) multiplexers. Arrays of distributed feedback (DFB) and distributed Bragg-reflection (DBR) quantum cascade lasers (QCLs) emitting at 4.7 μmwavelength are coupled to AWGs on the same chip. Low-loss spectral beam combining allows for brightness scaling by coupling the light generated by multiple…
|Congratulations to Tony and Paolo for this invited paper on integrated isolators and circulators.||August 9, 2018||
Optical isolators and circulators are extremely valuable components to have in photonic integrated circuits, but their integration with lasers poses significant design and fabrication challenges. These challenges largely stem from the incompatibility of magnetooptic material with the silicon or III-V platforms commonly used today for photonic integration. Heterogeneous integration using wafer bonding can overcome many of these challenges, and provides a promising path towards integrating…
|Congratulations to Alan Liu on the publication of this analysis of alternative approaches to high levels of optical integration||August 3, 2018||
We present a brief overview of the various leading platforms for photonic integration. Subsequently, we consider the possibility of a photonic integrated circuit platform utilizing epitaxially grown III–V material on silicon—without the need for wafer bonding, or an externally coupled laser. Finally, a technoeconomic analysis contrasting the aforementioned platforms will be presented.
|Congratulations to Yating and team for selection as cover article and Editor's Choice on this article just published on low threshold, high speed quantum dot ring lasers.||July 26, 2018||
Microring lasers feature ultralow thresholds and inherent wavelength-division multiplexing functionalities, offering an attractive approach to miniaturizing photonics in a compact area. Here, we present static and dynamic properties of microring quantum dot lasers grown directly on exact (001) GaP/Si. Effectively, a single-mode operation was observed at 1.3 μm with modes at spectrally distant locations. High temperature stability with T 0∼103 K has been achieved with a low threshold of 3 mA…
|Congratulations to Daehwan Jung for winning Best Paper Award at OECC 2018!||July 15, 2018||
1.3 μm InAs quantum dot lasers on Si show a CW threshold current of 4.8 mA and extrapolated lifetimes of ten million hours at 35 °C and ~65,000 hours at 60 °C.
|Intel Wins SEMI Award at SEMICON West for Process and Integration||July 11, 2018||
Intel has won SEMI’s 2018 Award for the Americas. SEMI honored the celebrated chipmaker for pioneering process and integration breakthroughs that enabled the first high-volume Integrated Silicon Photonics Transceiver. The award was presented yesterday at SEMICON West 2018.
|We are using p-modulation doping to reduce the linewidth enhancement factor in Quantum Dot lasers. This is important for narrower linewidth lasers, lower chirping lasers and reduced reflection sensitivity lasers.||June 21, 2018||
This work reports on the ultra-low linewidth enhancement factor (aH-factor) of semiconductor quantum dot lasers epitaxially grown on silicon. Owing to the low density of threading dislocations and resultant high gain, an aH value of 0.13 that is rather independent of the temperature range (288 K–308 K) is measured. Above the laser threshold, the linewidth enhancement factor does not increase extensively with the bias current which is very promising for the realization of future integrated…
|Achieving Unprecedented Frequency Control in Miniature Lasers||April 25, 2018||
Only a few decades ago, finding a particular channel on the radio or television meant dialing a knob by hand, making small tweaks and adjustments to hone in on the right signal. Of course, we now take such fine tuning for granted, simply pressing a button to achieve the same effect. This convenience is enabled by radio frequency synthesis, the generation of accurate signal frequencies from a single reference oscillator. The need for better radar in World War II drove the development of radio…
|The importance of reducing threading dislocation density on laser lifetime is detailed in this paper.||April 16, 2018||
We investigate the impact of threading dislocation density on the reliability of 1.3 lm InAs quantum dot lasers epitaxially grown on Si. A reduction in the threading dislocation density from 2.8108 cm2 to 7.3106 cm2 has improved the laser lifetime by about five orders of magnitude when aged continuous-wave near room temperature (35 C). We have achieved extrapolated lifetimes (time to double initial threshold) more than 10 106 h. An accelerated laser aging test at an elevated temperature (60…
|A first for single-section QDML lasers on Si||April 2, 2018||
The first single-section quantum dot mode-locked laser directly grown on a CMOS-compatible silicon substrate has been produced by researchers in the US. Their achievement could open the door to much lower complexity, cheaper laser sources for future large-scale silicon photonic integrated circuits.
|An invited summary of the prospects for quantum dot photonic integrated circuits has just been published.||March 27, 2018||
Direct epitaxial integration of III-V materials on Si offers substantial manufacturing cost and scalability advantages over heterogeneous integration. The challenge is that epitaxial growth introduces high densities of crystalline defects that limit device performance and lifetime. Quantum dot lasers, amplifiers, modulators, and photodetectors epitaxially grown on Si are showing promise for achieving low-cost, scalable integration with silicon photonics. The unique electrical confinement…
|A new review paper on the exciting technology and applications of thin film LiNbO3 has just been published||March 19, 2018||
Lithium niobate on insulator (LNOI) technology is revolutionizing the lithium niobate industry, enabling higher performance, lower cost and entirely new devices and applications. The availability of LNOI wafers has sparked significant interest in the platform for integrated optical applications, as LNOI offers the attractive material properties of lithium niobate, while also offering the stronger optical confinement and a high optical element integration density that has driven the success…
|A new paper on high performance 2 micron arrayed waveguide gratings has just been published.||February 27, 2018||
Low-loss arrayed waveguide gratings (AWGs) are demonstrated at a 2.0-μm wavelength. These devices promote rapidly developing photonic applications, supported by the recent development of mid-infrared lasers integrated on silicon (Si). Multi-spectral photonic integrated circuits at 2.0-μm are envisioned since the AWGs are fabricated with the 500-nm-thick Si-on-insulator platform compatible with recently demonstrated lasers and semiconductor optical amplifiers on Si. Characterization with the…
|Reducing dislocations in gallium arsenide on silicon templates||January 23, 2018||
University of California Santa Barbara (UCSB) in the USA has been working to optimize gallium arsenide (GaAs) molecular beam epitaxy (MBE) on gallium phosphide on silicon (GaP/Si) [Daehwan Jung et al, J. Appl. Phys., vol122, p225703, 2017]. Normally, growth of GaAs on Si uses off-axis substrates in efforts to avoid anti-phase domains. On-axis silicon is preferred for compatibility with CMOS processing foundries. The lattice mismatch between GaAs and Si is ~4%, leading to dislocations.
|Chao Xiang demonstrated a novel scissors design with widely tunable delays and large dynamic range. The device and performance are shown below:||January 22, 2018||
Abstract—We design, fabricate, and characterize ultra-low loss continuously tunable optical true time delay devices based on Si3N4 ring resonators in a side-coupled integrated spaced sequence of resonators (SCISSOR) structure. A large tunable delay range up to 3.4 ns is demonstrated using the Balanced SCISSOR delay tuning scheme, for a record loss of only 0.89 dB/ns of delay. By optimizing the coupler design a device delay bandwidth of over 10 GHz is achieved with over 0.5 ns maximum time…
|An important paper on Epitaxial Quantum Dot lasers on silicon has just been published.||December 18, 2017||
|Congratulations to Chong Zhang for an Invited Paper on the highest capacity transceiver on Si.||December 12, 2017||
Silicon photonic integration is an enabling technology for power- and cost-effective optical interconnects in exascale performance computers and datacenters which require extremely low power consumption and dense integration for a higher interface bandwidth density. In this paper, we experimentally demonstrate a fully integrated optical transceiver network on a silicon substrate using heterogeneous integration. High performance on-chip lasers, modulators and photodetectors are enabled by…
|Congratulations to Tony and Paolo for demonstrating broadband integrated MZI optical isolators with 100 nm tuning, which covers the entire S + C telecom bands.||November 21, 2017||
We demonstrate integrated optical isolators with broadband behavior for the standard silicon-on-insulator platform. We achieve over 20 dB of optical isolation across 18 nm of optical bandwidth. The isolator is completely electrically controlled and does not require a permanent magnet. Furthermore, we demonstrate the ability to tune the central operating wavelength of the isolator across 100 nm, which covers the entire S + C telecom bands. These devices show promise for integration in optical…
|Congratulations to Tin for demonstrating a novel idea to make a very stable arbitrary microwave frequency generator!||November 20, 2017||
We demonstrate a technique to precisely control and stabilize the beat frequency of a photonic microwave signal generator based on beating the optical signals of two lasers on a high-speed photodetector. The approach does not require high-speed electronic circuitry, but allows the control of the generated signal frequency up to hundreds of GHz. The demonstrated technique can readily be integrated on a chip-scale device using heterogeneous silicon platform, opening possibilities for…
|Congratulations to Justin Norman for winning Best Student Paper award at the 2017 IEEE International Photonics Conference||October 24, 2017||
We report 1300 nm continuous wave lasing on an on-axis GaP/Si (001) virtual substrate operating up to 60°C with record low threshold current of 27 mA. Ridge and broad area lasers were fabricated with seven layers of p-modulation doped quantum dots and as-cleaved facets.
|Congratulations to Alex Spott and colleagues for a postdeadline paper at the 2017 IEEE International Photonics Conference on the first Interband Cascade Laser on Silicon.||October 12, 2017||
We demonstrate the first interband cascade lasers heterogeneously integrated with silicon waveguides. The 3.6 μm wavelength lasers operate in pulsed mode at room temperature, with threshold currents as low as 394 mA.
|High efficiency low threshold current 1.3 μm InAs quantum dot lasers on on-axis (001) GaP/Si||September 27, 2017||
As a result of record low threading dislocation densities, the threshold current and threshold current density have gone down in our Quantum Dot lasers, and we see record high wallplug efficiencies for any laser on silicon.
|1.3 μm submilliamp threshold quantum dot micro-lasers on Si||August 1, 2017||
The cover of the latest issue of Optica shows the latest quantum dot microring lasers on silicon with record low lasing thresholds. This is promising for next generation data center interconnects.
|Looking for Postdocs (immediately) and Graduate Students for Admission in Fall 2018||July 1, 2017||
We are looking for two photonics students and two postdocs for design, fabrication and testing of photonic integrated circuits. Students should apply to the ECE or Materials departments for Fall 2018 admission. Postdocs should apply directly to Prof. Bowers.
|Semiconductor Today article on Quantum Dot Laser and Photodetector Integration||June 30, 2017||
UCSB and HKUST demonstrated the integration of quantum dot lasers and photodetectors on silicon substrates. An ultra-low dark current of 0.8 nA and an internal responsivity of 0.9 A/W were measured in the O band.
|Gordon Kino, 1928-2017||June 29, 2017||
Gordon Kino was my PhD advisor and a great mentor and researcher. He was my inspiration and model for a great professor. He will be missed by so many researchers across the world.
|The Revolution Has Just Begun: Q&A with John Bowers||January 8, 2017||
UCSB successfully demonstrated an electrically pumped hybrid silicon laser a decade ago. That advance has paved the way for the commercial production of high-bandwidth silicon photonic devices. Today, Bowers is leading UC Santa Barbara’s Institute for Energy Efficiency’s involvement in the AIM initiative and is a central figure in this exciting field. Photonics Spectra spoke with Bowers about AIM, his breakthrough work and the impact of integrated photonics on medicine, communications and…
|John Bowers awarded 2017 IEEE Photonics Award||August 3, 2016||
John Bowers, Professor of Materials and of Electrical and Computer Engineering, has been awarded the 2017 IEEE Photonics Award in honor of his pioneering research in silicon photonics, including hybrid silicon lasers, photonic integrated circuits, and ultra low-loss waveguides.
Please click on the following link to read on.
|Best Chapter||April 13, 2016||
The UC Santa Barbara student chapter of the Institute of Electrical and Electronics Engineer’s Photonics Society has been named Chapter of the Year for 2016.
Established four years ago, the student organization of young engineers at UCSB is recognized for its effort in promoting professional growth and career development in the field of photonics. “This international award exemplifies the strength of our local photonics community and the hard work of our members to promote…